2002 Ford Ka

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security various places (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to sill (6.2.2 (d) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill floor (5.3.6 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security various places (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp aim projected beam image is obviously incorrect both need polish (4.1.2 (c))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Nearside Front Upper Suspension component pin or bush excessively worn mount (5.3.4 (a) (i))

Offside Front Upper Suspension component pin or bush excessively worn mount (5.3.4 (a) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis sub frame mount (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

various areas corroded

Offside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

various areas corroded

both sills and floor areas coroded

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Braking system leaking valve at wheel arch (3.6.A.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear coil spring cracked (2.4.C.1a)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

o/s/f wishbone,rear bush starting to debond