2003 Yamaha Tzr 50

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear wheel bearings have slight free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

r/h handlebar slightly bent,slightly trapping hands on full lock

Direction indicators flashing more than 120 times per minute (1.5.1c)

Offside Front Direction indicators not working (1.5.1c)

Rear wheel bearings are excessively rough (2.4.A.2c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering headbearing has excessive free play (2.2.2)

r/h handlebar slightly bent,slightly trapping hands on full lock

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Oil leak ()

Rear Brake disc(s) slightly worn (3.2.A1l)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Horn not working (1.7.3a) DANGEROUS

Drive chain slightly tight (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Oil leak ()

Rear Brake disc(s) slightly worn (3.2.A1l)

Fairings insecure but not likely to impede the steering (2.1.2e)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Front suspension assembly component excessively misaligned (2.3.1)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp aim not tested (1.6)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Steering headbearing has excessive free play (2.2.2)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear wheel bearings are slightly rough (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Horn not working (1.7.3a)

Nail in rear tyre

number plate illumination bulb not working

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

steering slightly stiff offside bodywork insecure