2006 Yamaha Ybr 125

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Indicator tell tale inoperative (4.9.1 (a) (i))

Offside Front Main frame lock stop damaged ,on full lock righthand down handle bars very close to fuel tank!!

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Wheel alignment slightly misaligned (2.4 (a))

both front fork stantions pitted

Rear Chain guard missing ()

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Chain guard missing ()

Drive chain sprocket worn, but not excessively rear sprocket cushion drive worn (6.1.7 (c) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Drive chain sprocket slightly loose sprocket only secured with one bolt (6.1.7 (c) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Front Chain guard insecure sprocket cover missing (6.1.7 (i))

Front Tyre incorrectly seated on the wheel rim tyre completely flat (5.2.3 (k))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Throttle operating incorrectly sticking (6.2.7 (a) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle tube split (6.2.7 (a) (ii)) DANGEROUS

Chain guard missing ()

Drive chain sprocket worn, but not excessively rear sprocket cushion drive worn (6.1.7 (c) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Drive chain sprocket slightly loose sprocket only secured with one bolt (6.1.7 (c) (i))

Registration plate slightly loose (0.1 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front tyre sidewalls perished

Headlamp slightly discoloured (4.1.4 (a))

rear sprocket cush drive slightly worn

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim too high (4.1.2 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front tyre sidewalls perished

Headlamp slightly discoloured (4.1.4 (a))

rear sprocket cush drive slightly worn

Rear reflector on motorcycle missing (1.4.1)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim too low (1.6)

Offside Front Direction indicator not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)