2006 Ford Focus

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

nearside front tyre worn on inner edge

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

nearside front tyre worn on inner edge

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front tyre poor condition

Nearside Rear Tyre worn close to the legal limit + worn on inner due too low pressure (4.1.E.1)

Nearside Rear tyre poor condition

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Headlamp aim too low (1.8)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front tyre poor condition

Nearside Rear Tyre worn close to the legal limit + worn on inner due too low pressure (4.1.E.1)

Nearside Rear tyre poor condition

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit and Worn on the edge (4.1.E.1)

Nearside Rear Tyre perished

Front Tyres (Wearing on edge)

Front Tyres (Wearing on edge)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low and too far to the left. (1.8)

nsf tyre wearing thin on inner edge

osf tyre wearing thin on inner edge

Exhaust system not adequately supported (7.1.1)

Offside Front Direction indicator not working (1.4.A.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

osf tyre wearing thin on inner edge

nsf tyre wearing thin on inner edge

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Direction indicators incorrect colour (1.4.A.2f)

Offside Rear Direction indicators incorrect colour (1.4.A.2f)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Power steering component(s) has slight seepage from a component (2.3.3b)