2008 Chevrolet Aveo

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps both (4.7.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front corrosion to outer sill panel not within a prescribed area

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill not structural or support panelling (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front corrosion to outer sill panel not within a prescribed area

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill not structural or support panelling (5.3.6 (a) (i))

Rear exhaust connection deteriorating

Brake pipe corroded, covered in grease or other material front to nearside rear brake hose (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front corrosion to outer sill panel not within a prescribed area

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill not structural or supportive panelling (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front corrosion to outer sill panel not within a prescribed area

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill not structural or supportive panelling (5.3.6 (a) (i))

Anti-lock braking system warning lamp does not illuminate Taped over (1.6 (a))

Brake pipe excessively corroded Front to rear pipes (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill areas front and rear (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill areas front and rear (6.1.1 (c) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Coolant leak ()

Exhaust mounting defective Front exhaust pipe very corroded (6.1.2 (a))

Fuel Pipe/s corroded ()

Fuel filter cable tied to mounting plate

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 25% imbalanced (1.2.1 (b) (i))

Sub-frame corroded but not seriously weakened Rear axle (5.3.3 (b) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill panel (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill panel (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened left and right (3.5.1i)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened left and right (3.5.1i)

n/s/rear wheel slight bind.