2002 Mercedes-benz Sprinter

Front Brake hose has slight corrosion to ferrule both hoses (1.1.12 (f) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security gearbox mount (6.2.2 (d) (i))

Rear Brake hose has slight corrosion to ferrule both hoses (1.1.12 (f) (i))

Rear rear parking brake low reading

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross chassis member corroded (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play recommended (5.3.4 (a) (i))

Nearside Front Shock absorbers has a reduced damping effect recommended (5.3.2 (d))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Lower Suspension arm ball joint has slight play recommended (5.3.4 (a) (i))

Offside Front Shock absorbers has a reduced damping effect recommended (5.3.2 (d))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Driver's seat with a defective structure mount unit (6.2.5 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear possible fuel leak from fuel line to tank recommend checked

Electrical wiring inadequately secured (4.11 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Items removed from driver's view prior to test

Electrical wiring inadequately secured removing from brake pipe & requires rerouting (4.11 (a) (i))

Nearside Front Child Seat fitted not allowing full inspection of adult belt

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front side marker not working

Nearside Rear side marker not working

Offside centre side marker not working

Front Anti-roll bar has slight play in a ball joint n/s and o/s front (2.4.G.2)

Front Anti-roll bar has slight play in a pin bearing both inner (2.4.G.2)

Front chassis coroded

Front suspension has slight play in a lower suspension ball joint both front lower (2.5.B.1a)

Rear Anti-roll bar has slight play in a pin/bush all inner and outer (2.4.G.2)

Rear both rear discs pitted and scored

Brake reservoir fluid level decreases after several pedal applications (3.3.C.1)

Direction indicator incorrect colour both front (1.4.A.2f)

Electrical wiring inadequately supported under chassis (1.9.2a)

Electrical wiring insecure positive battery terminal (1.9.2a)

Horn not working (1.6.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working both (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Vehicle Identification Number has more than one different number displayed (6.3.5.b)

Braking system leaking front to rear brake pipe (3.6.A.1) DANGEROUS

Anti-roll bar linkage has slight play in a pin/bush n/s and o/s front (2.4.G.2)

Brake pipe slightly corroded both front to rear (3.6.B.2c)

Front Anti-roll bar has slight play in a pin/bush both inner (2.4.G.2)

Front chassis corroded

Rear Anti-roll bar has slight play in a pin/bush all inner and outer (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Suspension arm has slight play in a ball joint both front lower (2.4.G.2)

Braking system not tested under pressure. Brake roller test not completed

Nearside Front Seat belt flexible stalk deteriorated likely to lead to failure under load (5.2.4a)