1984 Austin Mini 1000 City E

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt torn/split (6.1.7 (g) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper not working (3.4 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement radius arm has slight play (5.3.4 (a) (i))

rear tyres cracking

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn radius arm (5.3.4 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

rear tyres cracking

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Headlamp aim too high (1.8)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Steering column movement between the shaft and steering wheel (2.1.2b)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brake pedal spongy (3.3.B.1b)

Direction indicators not working (1.4.A.2c)

Front Sub-frame fractured (2.4.G.1)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Tie bar/rod severely distorted (2.4.G.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp aim too low (1.8)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

bonnet safety catch missing

bonnet stay missing

slight freeplay detected at steering wheel

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Radius arm attachment bracket/mounting insecure (2.4.G.1)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)