MOT Status
ExpiredMileage
95,701 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened front and rear all arms (5.3.3 (b) (i))
Tyre slightly damaged/cracking or perishing x4 all (5.2.3 (d) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner door shut and inner and outer seal in number of places and inner wheel arch in number of places (7.1.1 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch number of places (5.3.6 (a) (i))
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner door shut and inner and outer seal in number of places and inner wheel arch in number of places (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch number of places (5.3.6 (a) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated pin hole (6.1.7 (g) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Brake pipe corroded, covered in grease or other material all brake pipes greased (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material all brake pipes greased (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt gaiter split (6.1.7 (g) (ii))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Exhaust emissions - engine idle speed too high (8.2.1.2 (e))
Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Windscreen washer not working (3.5 (a))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure inner wall (5.2.3 (d) (ii)) DANGEROUS
Trailer electrical socket (13 pin) not functioning at all (4.10 (c) (ii)) DANGEROUS
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Brake cable has wires broken and is significantly weakened (3.5.1b)
Offside Steering rack gaiter split (2.2.D.2d)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside rear brake recording little or no effort (3.7.B.5a)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
B316 EAW is a 1984 Mazda 323 in Green with a 1,296cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 1984 Mazda 323 models, the average MOT pass rate is 65.0% with a typical mileage of 59,958 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying B316 EAW, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 42 years old, this Mazda 323 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of B316 EAW?
You can check the full history of B316 EAW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was B316 EAW registered?
B316 EAW is a 1984 Mazda 323, first registered on 1 August 1984.
Is B316 EAW safe to buy?
The MOT history for B316 EAW shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does B316 EAW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on B316 EAW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.