1985 Volkswagen T25

Coolant leak ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

under body corrosion

Horn not working (7.7 (a))

Nearside Front Body component corroded and likely to cause injury floor (6.2.1 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Coolant leak ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

under body corrosion

Nearside Front seat belt anchorage mounting has hole on body

Nearside Front sill corroded has hole

Body corrosion

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

exhaust system deteorated

underbody corrosion

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Body corrosion

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

exhaust system deteorated

underbody corrosion

Front Wheel bearing has slight play x2 (5.1.3 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Wheel bearing has slight play x2 (5.1.3 (a) (i))

Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

body corrosion

underbody corrosion

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Wheel bearing has slight play x2 (5.1.3 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Wheel bearing has slight play x2 (5.1.3 (a) (i))

Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

body corrosion

underbody corrosion

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Bumper damaged and likely to cause injury when grazed or contacted end cap missing sharp edges protruding (6.1.4 (a) (i))

Offside Rear Bumper damaged and likely to cause injury when grazed or contacted end cap missing jagged edge protruding (6.1.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Body has a sharp edge caused by corrosion corrosion hole inner sill (6.1.C.1)

Nearside Front Body has a sharp edge caused by corrosion outer sill corrosion hole (6.1.C.1)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Brake hose excessively deteriorated loose on top mounting no clip (3.6.B.4d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Front Horn not working (1.6.2a)

Nearside Front Wheel stud(s) missing (4.2.A.1e)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe leaking (3.6.A.1) DANGEROUS

Front Horn not working (1.6.2a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Brake pipe excessively chafed (3.6.B.2c)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pedal spongy (3.3.B.1b)

Exhaust system not adequately supported (7.1.1)

Horn not working (1.6.2a)

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Headlamp aim too low (1.8)

Nearside Rear All position lamps not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear fog lamp switch faulty (1.3.1a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Headlamp main beam warning lamp not working

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside obligatory mirror damaged, NOT affecting the rear view

Body has a projection caused by corrosion (6.1.C.1)

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake hose excessively deteriorated (3.6.B.4d)

Front Horn not working (1.6.2a)

Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)