MOT Status
ExpiredMileage
7,914 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vallance (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance (5.3.6 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension arm pin or bush excessively worn radius arm (5.3.4 (a) (i))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))
Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Fuel Pipe/s corroded ()
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Boot floor (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn Bolt not tight (5.3.4 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Inner Play in steering rack inner joint(s) ()
Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Fuel Pipe/s corroded ()
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Under-body corrosion
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Under-body Corrosion
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Under-body Corrosion
Headlamp aim too low both (4.1.2 (a))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded tie bar (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Nearside Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
both front floor pans have been repaired , there is still visable corrosion but not excessive
rear sub frame has been repaired
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
How Reliable is the Austin Mini 1000 City E?
Based on 44,703 MOT tests across 5,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
B695 SVR is a 1984 Austin Mini 1000 City E in Blue with a 998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 1984 Austin Mini 1000 City E models, the average MOT pass rate is 65.9% with a typical mileage of 50,606 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini 1000 City E fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 3,881 recorded failures. If you're considering buying B695 SVR, it's worth having these areas checked by a mechanic before committing.
The Austin Mini 1000 City E typically stays on UK roads for around 44 years. At 42 years old, this Austin Mini 1000 City E is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of B695 SVR?
You can check the full history of B695 SVR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was B695 SVR registered?
B695 SVR is a 1984 Austin Mini 1000 City E, first registered on 7 November 1984.
Is B695 SVR safe to buy?
The MOT history for B695 SVR shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does B695 SVR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on B695 SVR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.