MOT Status
ValidMileage
86,184 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Horn not working (7.7 (a))
Offside Front Headlamp aim too low (4.1.2 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Horn not working (7.7 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced and middle floor (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced and middle floor (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Position lamp not working both (4.2.1 (a) (ii))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outrigger (6.1.1 (c) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Lower Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Direction indicator incorrect colour (4.4.3 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))
Offside Front Position lamp incorrect colour (4.2.3 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Nearside Front coil spring broken (2.4.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Headlamp aim too low (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Headlamp aim too high (1.8)
Offside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.D.4)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Parking brake recording little or no effort (3.7.D.3a)
Offside Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate missing (6.3.1a)
Horn not loud enough to be heard by another road user (1.6.2b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Engine coolant light on
Nail in nearside rear tyre
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Service spanner light on
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear Stop lamp not working (1.2.1b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
B7 SWA is a 2004 Peugeot Boxer in Silver with a 2,800cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2004 Peugeot Boxer models, the average MOT pass rate is 72.4% with a typical mileage of 43,354 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying B7 SWA, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 22 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of B7 SWA?
You can check the full history of B7 SWA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was B7 SWA registered?
B7 SWA is a 2004 Peugeot Boxer, first registered on 27 May 2004.
Is B7 SWA safe to buy?
The MOT history for B7 SWA shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does B7 SWA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on B7 SWA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.