MOT Status
ExpiredMileage
96,247 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
damage to o/s/front door, o/s outer sill, & front bonnet
front brakes slightly high imbalance when releasing
Nearside Front Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp aim too high and too far to the left. (1.8)
Offside Front Headlamp insecure (1.7.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Direction indicators not working (1.4.A.2c)
Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
damage to o/s/front door, o/s outer sill, & front bonnet
front brakes slightly high imbalance when releasing
Front Brake pad(s) wearing thin (3.5.1g)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp aim too high (1.8)
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BC03 CYV is a 2003 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BC03 CYV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BC03 CYV?
You can check the full history of BC03 CYV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BC03 CYV registered?
BC03 CYV is a 2003 Peugeot 206, first registered on 19 March 2003.
Is BC03 CYV safe to buy?
The MOT history for BC03 CYV shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BC03 CYV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BC03 CYV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.