MOT Status
ExpiredMileage
108,966 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Suspension component mounting prescribed area is distorted but not considered excessive rear complete panel (2.4.A.3)
all welding covered by substance unable to check properly
exhaust and mountings corroded-x2 front coil springs corroded
rear panel corroded-x2 rear inner sills corroded-o/s/r tyre inner edge wearing low
x2 front inner wheel arches corroded-front and rear brakes slightly juddering
x2 rear leaf springs corroded-x2 inner and outter sills corroded
x2 rear wheel bearings have slight play-n/s/f and o/s/f chassis legs corroded
Exhaust system not adequately supported front exhaust mounting broken (7.1.1)
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc inner cv boot (2.5.C.1a)
Nearside Front Suspension component mounting prescribed area is excessively corroded lower inner wheel arch holed, multiple places (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outter sill holed (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed, multiple places (2.4.A.3)
Offside Front Brake hose excessively chafed flexi hose (3.6.B.4d)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part flexi hose (3.6.B.4a)
Offside Front Suspension component mounting prescribed area is excessively corroded outter sill holed (2.4.A.3)
Offside Front Track rod end ball joint dust cover missing (2.2.C.1c)
Offside Rear Body has a sharp edge caused by corrosion outter wheel arch sharp edge (6.1.C.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded outter to inner sill holed and distorted (2.4.A.3)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Suspension component mounting prescribed area is excessively corroded inner sill holed, multiple places (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear fog lamp switch faulty (1.3.1a)
Service brake: efficiency below requirements (3.7.B.7)
Suspension component mounting prescribed area is excessively corroded rear panel holed, multiple places (2.4.A.3)
exhaust and mountings corroded-x2 front coil springs corroded
rear panel corroded-x2 rear inner sills corroded-o/s/r tyre inner edge wearing low
x2 front inner wheel arches corroded-front and rear brakes slightly juddering
x2 rear leaf springs corroded-x2 inner and outter sills corroded
x2 rear wheel bearings have slight play-n/s/f and o/s/f chassis legs corroded
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
all front and rear chasis legs corroded-x2 font coil springs corroded
all inner arches corroded and weak-all inner and outer sills corroded and weak and distorted-parking brake passed on limits-
x2 rear wheel bearings have slight play-all inner wheel arches corroded and distorted-x2 inner and outter sills corroded-exhaust system corroded-x2 leaf springs corroded-rear panel corroded
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
all front and rear chasis legs corroded-x2 font coil springs corroded
x2 rear wheel bearings have slight play-all inner wheel arches corroded and distorted-x2 inner and outter sills corroded-exhaust system corroded-x2 leaf springs corroded-rear panel corroded
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Headlamp aim too low (1.8)
Nearside Lower Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Offside Headlamp insecure (1.7.3)
Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate delaminated (6.3.1d)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve linkage seized (3.6.E.3)
slight play in o/s inner rack joint
slight play in o/s inner rack joint
Rear Brake pad(s) wearing thin (3.5.1g)
slight bind nearside rear
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Registration plate lamp not working (1.1.5c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Nearside Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Citroen Relay?
Based on 1,209,729 MOT tests across 108,809 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BC04 JCY is a 2004 Citroen Relay in White with a 2,179cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2004 Citroen Relay models, the average MOT pass rate is 64.2% with a typical mileage of 87,244 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Citroen Relay fails its MOT is parking brake: efficiency below requirements, accounting for 39,680 recorded failures. If you're considering buying BC04 JCY, it's worth having these areas checked by a mechanic before committing.
The Citroen Relay typically stays on UK roads for around 31 years. At 22 years old, this Citroen Relay is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BC04 JCY?
You can check the full history of BC04 JCY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BC04 JCY registered?
BC04 JCY is a 2004 Citroen Relay, first registered on 29 June 2004.
Is BC04 JCY safe to buy?
The MOT history for BC04 JCY shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BC04 JCY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BC04 JCY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.