MOT Status
ValidMileage
144,632 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened beam (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear chassis (5.3.6 (a) (i))
Wheel/tyre protruding beyond wheel arch x4 ()
Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened beam (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear chassis (5.3.6 (a) (i))
Wheel/tyre protruding beyond wheel arch x4 ()
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Wheel/tyre protruding beyond wheel arch x4 ()
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Wheel/tyre protruding beyond wheel arch x4 ()
Emissions unable to be completed (8.2.1.2 (d))
Front Registration plate inscription illegible (0.1 (b))
Nearside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Front Brakes imbalanced across an axle by more than 50% 59% (1.2.1 (b) (ii)) DANGEROUS
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Windscreen washer not working (3.5 (a))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear fog lamp switch inoperative (4.5.3 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Position lamp incorrect colour (4.2.3 (a) (i))
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Nissan Cube?
Based on 40,688 MOT tests across 3,773 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BC05 PAO is a 2005 Nissan Cube in White with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2005 Nissan Cube models, the average MOT pass rate is 76.6% with a typical mileage of 106,261 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Cube fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 416 recorded failures. If you're considering buying BC05 PAO, it's worth having these areas checked by a mechanic before committing.
The Nissan Cube typically stays on UK roads for around 23 years. At 21 years old, this Nissan Cube is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BC05 PAO?
You can check the full history of BC05 PAO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BC05 PAO registered?
BC05 PAO is a 2005 Nissan Cube, first registered on 31 December 2005.
Is BC05 PAO safe to buy?
The MOT history for BC05 PAO shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BC05 PAO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BC05 PAO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.