2004 MG Zr

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offside rear tyre deteriorated and cracking on sidewall

Battery insecure (1.9.1)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Windscreen wiper does not clear the windscreen effectively blade split (8.2.2)

Power steering inoperative (2.3.3a)

Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven lower effort from nearside (3.7.B.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offside rear tyre deteriorated and cracking on sidewall

Battery insecure (1.9.1)

Brake pedal spongy (3.3.B.1b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Power steering component(s) leaking (2.3.3b)

Offside Headlamp aim too high (1.8)

Power steering fluid level below minimum (2.3.1)

Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak ()

drive belt not on bottom pulley

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear wheel bearing has excessive play (2.6.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Both front outter c.v. boots starting to perish

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Both front outter c.v. boots starting to perish

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Registration plate lamp not working (1.1.5c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)