MOT Status
ExpiredMileage
100,947 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Other passenger door catch deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Rear Position lamp not working (4.2.1 (a))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Other passenger door catch deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Items removed from driver's view prior to test ()
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)
Offside Side repeater incorrect colour (1.4.A.2f)
Items removed from driver's view prior to test ()
Nearside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
rear brakes only just met the required standard it would appear the need attention
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve seized (3.6.E.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Direction indicator not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Emissions just met
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Stop lamp slightly affected by the operation of another lamp (1.2.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Offside rear brake recording little or no effort (3.7.B.5a)
Rear Brake load sensing valve seized (3.6.E.3)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Emissions just met
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
os front wiper slightly smeering / juddering
Brakes imbalanced across an axle (3.7.B.5b)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
os front wiper slightly smeering / juddering
Offside Front Upper Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front coil spring fractured (2.4.C.1a) DANGEROUS
Offside Front coil spring corroded (2.4.C.1b)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high (1.8)
Rear registration plate deteriorated (6.3.1d)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD02 ZTN is a 2002 Peugeot 206 in Black with a 1,360cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BD02 ZTN, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD02 ZTN?
You can check the full history of BD02 ZTN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD02 ZTN registered?
BD02 ZTN is a 2002 Peugeot 206, first registered on 24 May 2002.
Is BD02 ZTN safe to buy?
The MOT history for BD02 ZTN shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD02 ZTN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD02 ZTN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.