MOT Status
ValidMileage
203,252 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Play in steering rack inner joint(s) both front ()
Sub-frame corroded but not seriously weakened front & rear (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement all front & rear (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear inner and outer sill (6.1.1 (c) (i))
front to rear under body & suspension components slightly corroded
Brake pipe corroded, covered in grease or other material both front & both rear (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Play in steering rack inner joint(s) both front ()
Sub-frame corroded but not seriously weakened front & rear (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear inner and outer sill (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Play in steering rack inner joint(s) both front ()
Sub-frame corroded but not seriously weakened front & rear (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened both front & both rear (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner (2.4.G.2)
Nearside Rear Upper Suspension arm has slight play in a pin/bearing (2.4.G.2)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Upper Suspension arm has excessive play in a pin/bearing (2.4.G.2)
Offside Rear Upper Suspension arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner (2.4.G.2)
Nearside Rear Upper Suspension arm has slight play in a pin/bearing (2.4.G.2)
Nearside Rear Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Parking brake lever has no reserve travel (3.1.6b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nail in offside rear tyre
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
How Reliable is the Land Rover Range Rover?
Based on 2,072,334 MOT tests across 178,266 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 CPE is a 2003 Land Rover Range Rover in Blue with a 2,926cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 76%.
Across all 2003 Land Rover Range Rover models, the average MOT pass rate is 76.0% with a typical mileage of 99,099 miles. This vehicle is performing in line with others of the same year.
The most common reason a Land Rover Range Rover fails its MOT is brake pipe excessively corroded, accounting for 63,439 recorded failures. If you're considering buying BD03 CPE, it's worth having these areas checked by a mechanic before committing.
The Land Rover Range Rover typically stays on UK roads for around 39 years. At 23 years old, this Land Rover Range Rover is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD03 CPE?
You can check the full history of BD03 CPE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 CPE registered?
BD03 CPE is a 2003 Land Rover Range Rover, first registered on 16 April 2003.
Is BD03 CPE safe to buy?
The MOT history for BD03 CPE shows 25 tests with a 76% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 CPE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 CPE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.