MOT Status
ExpiredMileage
125,824 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Brake valve leaking LSV (1.1.7 (d) (i))
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords In tread (5.2.3 (d) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn Loose in hub, HUB WORN !!!!!!!! (5.3.4 (a) (i))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust system insecure (6.1.2 (a))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords In tread (5.2.3 (d) (i))
Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Emissions not tested Due to miss fire (8.2.1.2 (d))
Rear Exhaust has a major leak of exhaust gases Fractured on silencer (6.1.2 (a))
Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Brake load sensing valve linkage defective and function impaired Arm seized (1.1.17 (a))
Exhaust system insecure Front and middle (6.1.2 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp insecure (4.1.1 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Suspension arm attachment bracket/mounting insecure Ball joint (5.3.3 (a) (i))
Nearside Front Nail in tyre ()
Oil leak, but not excessive (8.4.1 (a) (i))
Tank strap corroded
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Nail in tyre ()
Oil leak, but not excessive (8.4.1 (a) (i))
Tank strap corroded
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive Rocker cover gasket (8.4.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive Rocker cover gasket (8.4.1 (a) (i))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Front Exhaust has a major leak of exhaust gases just after cat (7.1.2)
Front Headlamp not working on dipped beam (1.7.5a)
Front Headlamp not working on main beam both (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Brake performance not tested (3.7.A.1)
Nearside Headlamp insecure (1.7.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front Brake hose leaking (3.6.A.1) DANGEROUS
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n/s/f tyre worn on the outer tread but has 1.6mm cross the central 3/4 of tread at time of the test
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n/s/f tyre worn on the outer tread but has 1.6mm cross the central 3/4 of tread at time of the test
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.0)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Horn not working (1.6.2a)
Indicator switch faulty (1.4.A.1)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Headlamp aim too high (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
dent in n/side sill
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 EPJ is a 2003 Peugeot 206 in Red with a 1,360cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BD03 EPJ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD03 EPJ?
You can check the full history of BD03 EPJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 EPJ registered?
BD03 EPJ is a 2003 Peugeot 206, first registered on 28 April 2003.
Is BD03 EPJ safe to buy?
The MOT history for BD03 EPJ shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 EPJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 EPJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.