MOT Status
ExpiredMileage
64,202 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake pipe corroded, covered in grease or other material Front and rear (1.1.11 (c))
Corrosion on front bulkhead, sills, floor pan, front and rear chassis members and sills
Off side headlamp poor beam pattern
Nearside Front Macpherson strut mounting damaged and seriously weakened (5.3.3 (b) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake pipe corroded, covered in grease or other material Front and rear (1.1.11 (c))
Corrosion on front bulkhead, sills, floor pan, front and rear chassis members and sills
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material Front and rear (1.1.11 (c))
Corrosion on front bulkhead, sills, floor pan, front and rear chassis members and both sills
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill,inner sill and wheel arch (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material Front and rear (1.1.11 (c))
Corrosion on front bulkhead, sills, floor pan, front and rear chassis members and both sills
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Brake pipe slightly corroded front and rear (3.6.B.2c)
Corrosion on front bulkhead sills, rear chassis rails and floor pan
Suspension arm rubber bush deteriorated but not resulting in excessive movement front near side and off side (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded floor pan (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded floor pan (2.4.A.3)
Brake pipe slightly corroded front and rear (3.6.B.2c)
Corrosion on front bulkhead sills, rear chassis rails and floor pan
Suspension arm rubber bush deteriorated but not resulting in excessive movement front near side and off side (2.4.G.2)
Corrosion on floor pan front bulkhead and sills
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Corrosion on floor pan front bulkhead and sills
Corrosion on floor pan, bulkhead and sills
Nearside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Corrosion on floor pan, bulkhead and sills
Corrosion on both sills
Corrosion on floor pan by front sub frame moints
Corrosion on front bulkhead
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Corrosion on both sills
Corrosion on floor pan by front sub frame moints
Corrosion on front bulkhead
Corrosion by front sub frame mounts on floor pan
Corrosion on floor by seat belt prescribed area
Corrosion on front bulkhead by brake mounting
Slight oil leak
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Corrosion by front sub frame mounts on floor pan
Corrosion on floor by seat belt prescribed area
Corrosion on front bulkhead by brake mounting
Slight oil leak
Coolant leak
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)
Offside Front Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)
Offside Outer Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear wheel bearing rough when rotated (2.6.1)
Coolant leak
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Both outersills getting rusty in places
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Brake hose excessively chafed (3.6.B.4d) DANGEROUS
Offside Front Brake hose excessively chafed (3.6.B.4d) DANGEROUS
Both outersills getting rusty in places
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp not in a clean condition but not affecting beam image (1.2.4a)
Offside Rear wheel bearing rough when rotated (2.6.1)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
condensation o/s head lamp
o/s washer jet blocked
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Spare tyre defective
o/s/r tyre cracking around edge
slight travel in service brake
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 OKA is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 57.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD03 OKA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD03 OKA?
You can check the full history of BD03 OKA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 OKA registered?
BD03 OKA is a 2003 Ford Ka, first registered on 28 April 2003.
Is BD03 OKA safe to buy?
The MOT history for BD03 OKA shows 26 tests with a 57.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 OKA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 OKA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.