MOT Status
ExpiredMileage
129,292 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill at rear (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill at rear (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Suspension component corroded but not seriously weakened rear sub frame (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened slightly corroded (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened slightly corroded (1.1.14 (a) (ii))
Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened slightly corroded (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened slightly corroded (1.1.14 (a) (ii))
Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened slightly corroded (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened slightly corroded (1.1.14 (a) (ii))
Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension arm corroded but not seriously weakened o/s n/s (2.4.G.1)
front discs pitted
Corrosion on brake discs
Corrosion on brake pipes.
Corrosion on prescribed areas.
Front Brake pipe excessively corroded Running up bulk head above subframe. (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded into flexy (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded Outer sill. (5.2.6)
Offside Rear Brake pipe excessively corroded Into flexy (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill (2.4.A.3)
Corrosion on brake discs
Corrosion on brake pipes.
Corrosion on prescribed areas.
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake pipe excessively corroded (3.6.B.2c)
Exhaust system not adequately supported (7.1.1)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear registration plate faded but not likely to be misread (6.3.1d)
exhaust heat guard insecure
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear coil spring corroded (2.4.C.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear coil spring corroded (2.4.C.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake pipe slightly corroded (3.6.B.2c)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear coil spring corroded (2.4.C.1b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
coolant level below minimum mark
signs of coolant leak around thermostat housing
slight play in nearside rear suspension component
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
evidence of slight coolant leak around thermostat housing
nsf tyre valve perished
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
chip to screen zone 'b'
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 PCV is a 2003 Ford Focus in Blue with a 1,596cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2003 Ford Focus models, the average MOT pass rate is 71.1% with a typical mileage of 70,585 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying BD03 PCV, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 23 years old, this Ford Focus is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD03 PCV?
You can check the full history of BD03 PCV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 PCV registered?
BD03 PCV is a 2003 Ford Focus, first registered on 21 June 2003.
Is BD03 PCV safe to buy?
The MOT history for BD03 PCV shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 PCV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 PCV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.