MOT Status
ExpiredMileage
95,163 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Emissions not tested (8.2.1.2 (d))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Inner Suspension arm pin or bush excessively worn foward bush (5.3.4 (a) (i))
Nearside Rear Direction indicator incorrect colour lense broken (4.4.3 (a))
Nearside Rear Inner Brake prescribed area is excessively corroded arch flexi brake hose insecure due to corrosion (1.1.21 (e) (i))
Nearside Rear Inner Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Rear Outer Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Front Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front wheel nuts on back to front
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Body has slight corrosion Inner Sill (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear coil spring fractured (2.4.C.1a)
Rear Spare wheel carrier insecure (6.4.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside door mirror is cracked
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear tyre perrished
offside rear tyre perrished
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Headlamp aim too low (1.8)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear tyre perrished
offside rear tyre perrished
Front Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres sidewalls perished
offside front outer sill slightly corroded
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nail in nearside rear tyre
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both rear tyres serface cracking
Offside Rear coil spring incomplete (2.4.C.1a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both rear tyres serface cracking advise replace
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 POH is a 2003 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD03 POH, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD03 POH?
You can check the full history of BD03 POH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 POH registered?
BD03 POH is a 2003 Ford Ka, first registered on 26 June 2003.
Is BD03 POH safe to buy?
The MOT history for BD03 POH shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 POH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 POH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.