2003 Honda Cr-v

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

EML on pre july 2003

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust backbox corroded

slight power steering leak

underside heavily covered in dirt

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front most bush (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement top arm both bushes worn (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement top arm both bushes worn (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

all brake pipes under bonnet area, corroded/greased

general underside corrosion

slight power steering leak

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Brake pipe excessively corroded front to rear, rear section (1.1.11 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front most bush (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement top arm both bushes worn (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement top arm both bushes worn (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

all brake pipes under bonnet area, corroded/greased

general underside corrosion

slight power steering leak

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

headlights faded

Nearside Front Brake pipe excessively corroded underbonnet (1.1.11 (c))

Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

headlights faded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Covers over sills prevent a complete corrosion check

Extensive surface corrosion but not affecting testable items

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

both rear tyre sidewalls perished

Brake pedal creeps down when held under pressure (3.3.B.1a)

Brake pedal has no servo assistance (3.3.B.2)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

rear tyre side walls deteriorated

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)