MOT Status
ExpiredMileage
100,615 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component looks like pressure sensor little bit wet (2.1.5 (a))
Emissions not tested exhaust blow centre section (8.2.1.2 (d))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Oil leaking excessively from engine (8.4.1 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (3.6.C.3)
Nearside Front coil spring corroded and offside front (2.4.C.1b)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement x 2 (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak ()
vehicle fuse box loose
Exhaust system not adequately supported rear section (7.1.1)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Headlamp aim too low (1.8)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Front Brake pipe excessively corroded to rear at load valve (3.6.B.2c) DANGEROUS
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (3.6.C.3)
Nearside Front coil spring corroded and offside front (2.4.C.1b)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement x 2 (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak ()
vehicle fuse box loose
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit inside edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit inside edge (4.1.E.1)
Offside Rear Tyre worn close to the legal limit inside edge (4.1.E.1)
oil leak
Brake pipe slightly corroded both front to rears (3.6.B.2c)
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
tracking out
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Brake pipe slightly corroded both front to rears (3.6.B.2c)
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
tracking out
offside rear bump stop missing
exhaust getting weak
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
exhaust getting weak
offside rear bump stop missing
Oil leak
slight wiper marks on windscreen
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working (1.1.C.1d)
slight wiper marks on windscreen
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Headlamp aim too high (1.8)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Headlamp aim too high (1.8)
Offside Rear rear brake binding (3.7.B.1)
Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.5c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 UJA is a 2003 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BD03 UJA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD03 UJA?
You can check the full history of BD03 UJA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 UJA registered?
BD03 UJA is a 2003 Peugeot 206, first registered on 9 May 2003.
Is BD03 UJA safe to buy?
The MOT history for BD03 UJA shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 UJA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 UJA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.