2003 Honda XL125V

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Lower Shock absorber has a slightly worn bush Mono shock bush (5.3.2 (c))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Headlamp aim projected beam image obviously incorrect Bulb incorrectly fitted (4.1.2 (c))

Rear Lower Shock absorber has a slightly worn bush Mono shock bush (5.3.2 (c))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Tyre perishing between treads

Wheel alignment slightly misaligned (2.4 (a))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Nearside Indicator tell tale inoperative (4.9.1 (a) (i))

Fuel system component leaking (6.1.3 (b) (i))

Drive chain slightly loose and worn (6.1.7 (c) (i))

Nearside Indicator tell tale inoperative (4.9.1 (a) (i))

neutral light not working

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Stop lamp not working With front brake (4.3.1 (a) (ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Handlebars slightly bent

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Handlebars slightly bent

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Offside Steering control has reduced clearance at full lock not affecting the riders operation of the controls (2.1.2b)

handlebar clamps incorrectly fitted

rear brake disc corroded

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Front Steering control has reduced clearance at full lock not affecting the riders operation of the controls (2.1.2b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Clutch lever bent (6.2.1g)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain excessively tight (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Rear Footrest insecure (6.2.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Clutch lever bent (6.2.1g)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Fairing insecure and likely to impede the steering (2.1.2e)

Front Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear Exhaust mounting missing (7.1.1c)

handlebars slightly down on n/s of machine

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

front tyre presure is low

handlebars are down on n/s off machine