MOT Status
ExpiredMileage
94,959 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both outer and inner sills corroded but not yet excessively both have previous welding repairs
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
o/s rear axle mount corroded
o/s rear brake pipe corroded
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front brake discs worn.
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front brake discs worn.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Spare tyre defective
play in both front top shocker mounts
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Spare tyre defective
play in both front top shocker mounts
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front coil spring fractured (2.4.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD03 YAG is a 2003 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD03 YAG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD03 YAG?
You can check the full history of BD03 YAG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD03 YAG registered?
BD03 YAG is a 2003 Ford Ka, first registered on 19 May 2003.
Is BD03 YAG safe to buy?
The MOT history for BD03 YAG shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD03 YAG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD03 YAG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.