MOT Status
ExpiredMileage
69,229 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch mark (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Brake hose slightly chafed (1.1.12 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing on walls (5.2.3 (d) (ii))
Position lamp not working front or rear (4.2.1 (a) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre slightly damaged/cracking or perishing on walls (5.2.3 (d) (ii))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ends sills (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill and inner sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill and inner sill (2.4.A.3)
Oil leak ()
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Child seat fitted not allowing full inspection of adult belt
Coolant leak
Vehicle's internal headlight adjuster altered to recheck lights
corrosion starting in osr inner wing/sill end.
nsr tyre is wearing on inner tread.
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD05 BWW is a 2005 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2005 Ford Ka models, the average MOT pass rate is 68.2% with a typical mileage of 43,813 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD05 BWW, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 21 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD05 BWW?
You can check the full history of BD05 BWW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD05 BWW registered?
BD05 BWW is a 2005 Ford Ka, first registered on 20 May 2005.
Is BD05 BWW safe to buy?
The MOT history for BD05 BWW shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD05 BWW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD05 BWW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.