2005 Toyota Aygo

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

heavily undersealed

Emissions unable to be completed Lamda too high due to exhaust leak. (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear axle mounting point weak/corroded. (5.3.6 (a) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both outer sills weak at rear, holes filled with body filler. (6.1.1 (c) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced Both inner sill / floor areas weak and holed near seat belt mounting points. (7.1.1 (a) (i))

Axle swivel pins and bushes swivel pin and/or bush slightly worn BOTH REAR (5.1.2 (b) (i))

Coolant leak

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions unable to be completed (8.2.1.2 (d))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Axle swivel pins and bushes swivel pin and/or bush slightly worn BOTH REAR (5.1.2 (b) (i))

Coolant leak

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Coolant leak

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing BOTH FRONT (5.2.3 (d) (ii))

Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Coolant leak

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing BOTH FRONT (5.2.3 (d) (ii))

both rear outer sills corroded

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a minor leak of exhaust gases center pipe joint (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

All suspension bushes worn/perished.

Brake pipe slightly corroded All brake pipes corroded. (3.6.B.2c)

Front exhaust support broken, however system still secure.

Rear exhaust hanger temporarily repaired.

Shock absorber has slight corrosion to the casing All shock absorbers (2.7.2a)

Vehicle structure has slight corrosion (6.1.A.1)

coil spring corroded All springs (2.4.C.1b)

Rear Brake pipe slightly corroded both (3.6.B.2c)

front exhaust support corroded/broken

rear exhaust support temporarily repaired

Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Rear Brake pipe slightly corroded both (3.6.B.2c)

front exhaust support corroded/broken

rear exhaust support temporarily repaired

Both head light lenses deteriorating

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

o/s rear tyre perishing

rear exhaust support broken-temporary repair

Nearside rear brake binding (3.7.B.1)

Both head light lenses deteriorating

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

o/s rear tyre perishing

rear exhaust support broken-temporary repair

Front registration plate deteriorated but not likely to be misread (6.3.1d)

N/S park brake minimum efficiency has only just been met, it may need adjustment or repair.

Parking brake lever has little reserve travel (3.1.6b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear exhaust support deteriorated

Nearside rear brake binding (3.7.B.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear exhaust support deteriorated

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear exhaust support deteriorated-temporary repair.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear exhaust support deteriorated-temporary repair.

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear exhaust deteriorating

Offside Front brake disc slightly pitted (3.5.1h)