MOT Status
ExpiredMileage
80,335 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Tyre(s) with different structures are fitted across the same axle (5.2.3 (c))
Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering floor (6.1.1 (c) (ii)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering floor (6.1.1 (c) (ii)) DANGEROUS
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Both front floor & inner sill areas corroded
Both front inner wheel arch areas corroded
Both front subframe mount point areas corroded
Both rear inner sills corroded
Both rear outer sill areas corroded
Exhaust system corroded front to rear
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing Perished (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing Perished (5.2.3 (d) (ii))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear underside of vehicle corroded (behind rear bumper)
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Corrosion around both front floor / inner sill areas
Corrosion around both front inner wheel arch areas
Corrosion around both rear inner sill areas
Exhaust system corroded front to rear
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Corrosion around both front floor areas
Corrosion around both front inner wheel arch areas
Corrosion around both rear inner sill areas
Front Brake disc worn, pitted or scored, but not seriously weakened Slightly pitted / scored (1.1.14 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Body has slight corrosion floor (6.1.B.2)
Offside Front Body has slight corrosion floor (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Tyre has ply or cords exposed split to cords (4.1.D.1b)
Offside Front Headlamp aim too low (1.8)
Offside Rear Tyre has ply or cords exposed split to cords (4.1.D.1b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear most (2.4.G.2)
Nearside Rear tyre perished
Offside Rear tyre perished
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear tyres perished
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside front brake excessively fluctuating (3.7.B.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear tyres perished
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear wheel bearing has slight play (2.6.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD06 KGV is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD06 KGV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD06 KGV?
You can check the full history of BD06 KGV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD06 KGV registered?
BD06 KGV is a 2006 Ford Ka, first registered on 31 May 2006.
Is BD06 KGV safe to buy?
The MOT history for BD06 KGV shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD06 KGV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD06 KGV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.