2007 Audi A3

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Reverse lights dont work

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced all rear arms corroded also (6.1.1 (c) (i))

engine light on

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced all rear arms corroded also (6.1.1 (c) (i))

engine light on

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre has a cut but not deep enough to reach the ply or cords all four (5.2.3 (d) (i))

rear heat shields slightly loose

slight exhaust blow

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre has a cut but not deep enough to reach the ply or cords all four (5.2.3 (d) (i))

rear heat shields slightly loose

slight exhaust blow

Bonnet primary retaining device slightly deteriorated (3.1 (c))

Front brake pads getting low & discs worn

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

engine covers & undertrays fitted

Rear Tyre's feathered inside edge

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Rear rear brake excessively fluctuating (3.7.B.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Fuel system component leaking (7.2.3)

Nearside Headlamp aim beam image obviously incorrect bulb incro fitted ? (1.8.A.1b)

Nearside Rear rear brake application uneven (3.7.B.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Rear Tyre worn close to the legal limit 1.6mm (4.1.E.1)

Stop lamp not working (1.2.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components