MOT Status
ExpiredMileage
99,719 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Suspension component mounting prescribed area is inadequately repaired floorpan to sill seam (5.3.6 (a) (i))
Nearside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Suspension component mounting prescribed area is inadequately repaired sill not seam welded at top ,not welded sufficiently an bottom and rear (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush likely to become detached lower arm rear bush (5.3.4 (a) (ii)) DANGEROUS
Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced fuel cap area (6.1.1 (c) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced fuel cap area (6.1.1 (c) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a))
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
offside rear tyre wall cracking
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight movement in nearside front upper strut mount.
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight movement in nearside front upper strut mount.
Offside Front Tyre worn close to the legal limit (4.1.E.1)
front brake discs slightly worn
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD08 KDV is a 2008 Ford Ka in Blue with a 1,297cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 66.7%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD08 KDV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD08 KDV?
You can check the full history of BD08 KDV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD08 KDV registered?
BD08 KDV is a 2008 Ford Ka, first registered on 31 May 2008.
Is BD08 KDV safe to buy?
The MOT history for BD08 KDV shows 12 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD08 KDV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD08 KDV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.