MOT Status
ValidMileage
141,413 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive rear chassis (5.3.6 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive rear chassis (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Steering linkage ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush excessively worn d bush (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn on inside edge (5.2.3 (e))
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on outside edge (5.2.3 (e))
Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top spring mount area (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm measuring at 1.3mm (5.2.3 (e)) DANGEROUS
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn on inside edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive top spring mount area (5.3.6 (a) (i))
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on outside edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge measuring at 1.7mm (5.2.3 (e))
Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material covered in grease (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material covered in grease (1.1.11 (c))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material covered in grease (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material covered in grease (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Items removed from driver's view prior to test
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD08 YBN is a 2008 Mercedes-benz Vito in Blue with a 2,148cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2008 Mercedes-benz Vito models, the average MOT pass rate is 71.3% with a typical mileage of 123,026 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying BD08 YBN, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 18 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD08 YBN?
You can check the full history of BD08 YBN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD08 YBN registered?
BD08 YBN is a 2008 Mercedes-benz Vito, first registered on 26 June 2008.
Is BD08 YBN safe to buy?
The MOT history for BD08 YBN shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD08 YBN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD08 YBN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.