2009 Suzuki Swift

Front Brake disc worn, but not excessively both (1.1.14 (a) (i))

Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Inner Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

general corrosion underneath

Front Sub-frame is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear axle corroded

general underside surface corrosion

Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Nearside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Nearside Windscreen washer not working (3.5 (a))

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

general under body corroded

rear axle corroded

Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced crossover pannel (6.1.1 (c) (i))

Nearside Front Inner Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Offside Front Inner Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing perishing (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (back bush) (5.3.4 (a) (i))

Nearside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (back bush) (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Front suspension has excessive movement at a suspension ball joint (2.5.A.1c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)