MOT Status
ValidMileage
221,041 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust mounting defective (6.1.2 (a))
Offside Rear Tyre slightly damaged/cracking or perishing also worn on inner shoulder (5.2.3 (d) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp insecure (4.1.1 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Exhaust mounting defective (6.1.2 (a))
Offside Rear Tyre slightly damaged/cracking or perishing also worn on inner shoulder (5.2.3 (d) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Central Front Lower Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front tyre wearing on inner edge
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))
Exhaust emissions exceed manufacturer's specified limit 0.51 (8.2.2.2 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp aim too low (4.1.2 (a))
Offside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))
Exhaust emissions exceed manufacturer's specified limit 0.51 (8.2.2.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin (3.5.1g)
engine covers & under shields obscuring some components
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD13 LZP is a 2013 Ford S-max in Grey with a 1,997cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 78.6%.
Across all 2013 Ford S-max models, the average MOT pass rate is 76.5% with a typical mileage of 69,573 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying BD13 LZP, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 13 years old, this Ford S-max is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD13 LZP?
You can check the full history of BD13 LZP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD13 LZP registered?
BD13 LZP is a 2013 Ford S-max, first registered on 24 July 2013.
Is BD13 LZP safe to buy?
The MOT history for BD13 LZP shows 14 tests with a 78.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD13 LZP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD13 LZP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.