2013 Peugeot 208

Nearside Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Nearside Rear Seat belt buckle missing (7.1.2 (d))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake pad(s) contaminated (1.1.13 (b))

Offside Front Driver's seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective on the back box (6.1.2 (a))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective on the back box (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

diesel emissions to clean for smoke meter reading plate value 0.51 (no printout supplied

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre has a cut but not deep enough to reach the ply or cords both sides (5.2.3 (d) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front Headlamp not working on dipped beam both sides (4.1.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre has a cut but not deep enough to reach the ply or cords both sides (5.2.3 (d) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))