2001 Peugeot 206

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension component damaged but not seriously weakened top suspension mounting siezed (5.3.3 (b) (i))

Emissions not tested (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases cat pipe broken (6.1.2 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim too high (4.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension component damaged but not seriously weakened top suspension mounting siezed (5.3.3 (b) (i))

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)

Central Exhaust has a minor leak of exhaust gases exhaust blowing and corroded (7.1.2)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Rear Exhaust has a minor leak of exhaust gases silencer holed (7.1.2)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Side repeater incorrect colour (1.4.A.2f)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Rear registration plate deteriorated (6.3.1d)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt outer front (2.5.C.1a)

Rear Brake pipe slightly corroded to bias valve (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pipe slightly corroded (3.6.B.2c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Brake load sensing valve seized (3.6.E.3)

Nearside Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

offside rear tyre starting to crack

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)