2003 Rover 75

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Advise exhaust system corroded.

Advise oil leak from engine.

Offside Front Shock absorber has a light misting of oil (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Nearside Stop lamp not working (1.2.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Offside Front Electrical wiring damaged, likely to cause a short (1.9.2b)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

brke warning light illuminated

near side fron jacking point pad missing

off side rear brake noisy on rooler brake test

windscreen washer weak

Nearside Front Anti-roll bar linkage worn and seriously weakened (2.4.G.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp aim too high (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Centre Rear Seat belt retracting mechanism defective (5.2.5b)

near side fron jacking point pad missing

off side rear brake noisy on rooler brake test

windscreen washer weak

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear exhaust box outer skin corroded

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear exhaust box outer skin corroded

Nearside Ball joint has slight play (2.2.B.1f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Ball joint has slight play (2.2.B.1f)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

expansion tank cap loose

offside & nearside front top suspension mounts bearing noise

rear tyres wearing outer edges (215/55r16)

Nearside Ball joint has slight play (2.2.B.1f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Ball joint has slight play (2.2.B.1f)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Stop lamp not working (1.2.1b)

expansion tank cap loose

offside & nearside front top suspension mounts bearing noise

rear tyres wearing outer edges (215/55r16)

all tyres wearing inner & outer edges

Front Windscreen washer provides insufficient washer liquid (8.2.3)

all tyres wearing inner & outer edges

O/S washer jets require adjustment

rear brake pads 3mm

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)