2003 Honda Civic

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor / chassis (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor / chassis (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

underside of vehicle showing signs of corrosion

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear coil spring broken (2.4.C.1a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

underside of vehicle showing signs of corrosion

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill back (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill back (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

o/s & n/s rear brake pipes corroded to pass limit

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

o/s & n/s rear brake pipes corroded to pass limit

Offside Front position lamp(s) not working (1.1.A.3b)

Rear rear brake binding (3.7.B.1)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

creaking noise from nearside rear suspension

rear brake discs corroded

n/s/f fog light not working

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear Brake pipe inadequately supported (3.6.B.1)

Offside Stop lamp not working (1.2.1b)

nearside rear tyre wearing unevenly (inner edge)

offside rear tyre wearing unevenly (inner edge)

nearside rear tyre wearing unevenly (inner edge)

offside rear tyre wearing unevenly (inner edge)