MOT Status
ExpiredMileage
70,395 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake load sensing valve seized (3.6.E.3)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp not working on dipped beam (1.7.5a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Side repeater slightly discoloured (1.4.A.2f)
both front tyres are wearing on the outer edges
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD52 YVE is a 2003 Peugeot 206 in Blue with a 1,124cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BD52 YVE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD52 YVE?
You can check the full history of BD52 YVE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD52 YVE registered?
BD52 YVE is a 2003 Peugeot 206, first registered on 2 January 2003.
Is BD52 YVE safe to buy?
The MOT history for BD52 YVE shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD52 YVE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD52 YVE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.