MOT Status
ExpiredMileage
106,595 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension top (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Torque/reaction arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front wheel bearing has slight play (2.5.A.3c)
front tyres wearing on inside edges
Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp shows direct white light to the rear (1.1.C.1f)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front wheel bearing has slight play (2.5.A.3c)
front tyres wearing on inside edges
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion to n/s front inner wheel arch
corrosion to o/s front inner wheel arch
corrosion to o/s rear inner wheel arch
engine managment light on
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion to both front inner wheel arches
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion to both front inner wheel arches
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mitsubishi Shogun Pinin?
Based on 191,872 MOT tests across 12,414 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD52 ZFK is a 2002 Mitsubishi Shogun Pinin in Silver with a 1,834cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2002 Mitsubishi Shogun Pinin models, the average MOT pass rate is 69.8% with a typical mileage of 63,437 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Shogun Pinin fails its MOT is brake pipe excessively corroded, accounting for 13,041 recorded failures. If you're considering buying BD52 ZFK, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Shogun Pinin typically stays on UK roads for around 26 years. At 24 years old, this Mitsubishi Shogun Pinin is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BD52 ZFK?
You can check the full history of BD52 ZFK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD52 ZFK registered?
BD52 ZFK is a 2002 Mitsubishi Shogun Pinin, first registered on 14 December 2002.
Is BD52 ZFK safe to buy?
The MOT history for BD52 ZFK shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD52 ZFK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD52 ZFK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.