2004 MG ZS

Brake pipe corroded, covered in grease or other material front and rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Fuel Pipe/s corroded ()

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced under side (6.1.1 (c) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill and floor (5.3.6 (a) (i))

Fuel Pipe/s corroded ()

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Fuel Pipe/s corroded ()

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security under side (6.2.2 (d) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front coil spring corroded (2.4.C.1b)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion underside (6.1.A.1)

Front Exhaust system not adequately supported (7.1.1)

Nearside Rear Braking system leaking (3.6.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Anti-roll bar has excessive play in a pin/bush d bushes (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion underside (6.1.A.1)

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

nsr caliper slightly binding

Rear Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

brake pipes covered

front pads wearing low

rear discs corroded

Front Headlamp aim too high (1.8)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

offside rear tyre has cut in sidewall

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)