2005 Toyota Dyna

Front Brake disc worn, pitted or scored, but not seriously weakened inner surfaces (1.1.14 (a) (ii))

Front brake pads wearing but unable to fully inspect thru wheel

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

headlamp levelling switch stick in operation

Headlamp levelling device inoperative (4.1.5 (a))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened inner surfaces (1.1.14 (a) (ii))

Front brake pads wearing but unable to fully inspect thru wheel

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Lower Steering column universal joint has slight wear or play (2.2.2 (c))

Steering system slightly rough (2.1.1 (a))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction sticker (3.1 (a) (ii))

Nearside Windscreen washer not working (3.5 (a))

Offside Windscreen washer not working (3.5 (a))

Steering column top bearing excessively worn (2.2.2 (b))

Lower Steering column universal joint has slight wear or play (2.2.2 (c))

Steering system slightly rough (2.1.1 (a))

Exhaust has a minor leak of exhaust gases From two joints centre joint and rear joint (6.1.2 (a))

Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill area (6.2.2 (d) (i))

Nearside Rear Nail in tyre ()

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Rear flat bed has various areas of corrosion (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases From two joints centre joint and rear joint (6.1.2 (a))

Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill area (6.2.2 (d) (i))

Nearside Rear Nail in tyre ()

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Rear flat bed has various areas of corrosion (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill area (6.2.2 (d) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Rear tipper bed has corrosion in various areas (6.1.1 (c) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake pad(s) wearing thin both front (1.1.13 (a) (ii))

Nearside Front under sill corroded but not in prescribed area

tipper body corroded

Nearside Front inner door step corroded

Nearside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Offside Rear lamp bracket damaged

Offside inner door step corroded

Nearside Dropside component insecure dropside catch (6.2.1 (a) (i))

Nearside Front inner door step corroded

Nearside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Offside Rear lamp bracket damaged

Offside inner door step corroded

Nearside Rear body mounting is holed and corroded but body is still securely fixed

Offside Rear body mounting is holed and corroded but body is still securely fixed

Offside Rear lamp mounting panel is holed and corroded but lamp is still securely fixed

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Trailer electrical socket damaged so that lead cannot be securely connected (1.9.3b)

Nearside Rear body mounting is holed and corroded but body is still securely fixed

Offside Rear body mounting is holed and corroded but body is still securely fixed

Offside Rear lamp mounting panel is holed and corroded but lamp is still securely fixed

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

o/s n/s front anti-roll bar bushes movement x4

o/s n/s front lower cab behind door steps corroded

rear exhaust bracket broke but system still supported

rear exhaust hanger disconnected

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

overplates fitted on front

Tyre worn close to the legal limit (4.1.E.1)