MOT Status
ExpiredMileage
173,934 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Front Windscreen washer not working (3.5 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp switch inoperative (4.5.3 (a))
All under body has corrosion
Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Radiator support corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Tyre worn close to legal limit/worn on edge BOTH SIDES (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Brake pipe corroded, covered in grease or other material by fuel tank (1.1.11 (c))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
rear diff corroded and drive shaft seal holders corroded around mounting bolts
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
rear diff casing corroded - driveshaft seal holders starting to break away from around bolts
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Central Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Emissions not tested (8.2.2.2 (e))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged slight sidewall damage (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front has object through tread area
Exhaust has a minor leak of exhaust gases (7.1.2)
Nail in nearside front tyre
cut in nearside front tyre to cords but not in excess of 1 inch in length
Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage missing (2.4.G.1)
Rear registration plate deteriorated (6.3.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Subaru Legacy?
Based on 349,986 MOT tests across 31,204 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD55 UPM is a 2005 Subaru Legacy in Blue with a 1,994cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 76.2%.
Across all 2005 Subaru Legacy models, the average MOT pass rate is 74.0% with a typical mileage of 87,707 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Subaru Legacy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 11,876 recorded failures. If you're considering buying BD55 UPM, it's worth having these areas checked by a mechanic before committing.
The Subaru Legacy typically stays on UK roads for around 35 years. At 21 years old, this Subaru Legacy is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD55 UPM?
You can check the full history of BD55 UPM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD55 UPM registered?
BD55 UPM is a 2005 Subaru Legacy, first registered on 7 December 2005.
Is BD55 UPM safe to buy?
The MOT history for BD55 UPM shows 21 tests with a 76.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD55 UPM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD55 UPM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.