2006 Subaru Forester

Underside of vehicle heavily coated in waxoyl

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch in various places (5.3.6 (a) (i))

Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced x2 (5.3.3 (b) (i))

Nearside Rear Upper Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced x2 (5.3.3 (b) (i))

Offside Rear Upper Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

both rear backing plates corroded

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive upper (5.3.6 (a) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive upper (5.3.6 (a) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Towbar component corroded, but not excessively (6.1.6 (a))

both rear backing plates corroded

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive upper (5.3.6 (a) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive upper (5.3.6 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Towbar component corroded, but not excessively (6.1.6 (a))

both rear backing plates corroded

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Central Rear Seat belt buckle missing (7.1.2 (d))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Sub-frame attachment bracket/mounting insecure rear bolt (5.3.3 (a) (i))

Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower fog lamp glass broken

Offside Front tyre slightly perished on outer shoulder area

slight condensation in o/s headlamp but not affecting beam image

towbar mountings rusty

Nearside Rear Outer Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Brake hose ferrule excessively corroded to drum (1.1.12 (f) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule to drum (1.1.12 (f) (i))

towbar mountings rusty

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Front head light aim on lower limit

Nearside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

engine under shields fitted

vehicle underside very dirty

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Exhaust system not adequately supported (7.1.1)

Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)

Front Brake pad(s) wearing thin (3.5.1g)

engine under shields fitted

vehicle underside very dirty

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Service brake grabbing slightly (3.7.C.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front brake discs deteriorating