2006 Peugeot 206

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Nail in tyre

Offside Rear Outer Stop lamp(s) not working (4.3.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases silencer corroded/blowing slightly (6.1.2 (a))

Offside Front Road wheel slightly distorted inner rim slightly bent (5.2.2 (c) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases silencer corroded/blowing slightly (6.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component attachment bracket/mounting likely to fail suspension top mount bearing siezed (5.3.3 (b) (ii)) DANGEROUS

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Central Exhaust has a minor leak of exhaust gases silencer corroded/blowing slightly (6.1.2 (a))

Offside Front Road wheel slightly distorted inner rim slightly bent (5.2.2 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases silencer corroded/blowing slightly (6.1.2 (a))

Central Exhaust has a minor leak of exhaust gases exhaust system deteriorated and slight blow (6.1.2 (a))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning brake light 2 bulbs not working (4.3.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge worn low (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material across rear axle area (1.1.11 (c))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Central Exhaust has a minor leak of exhaust gases exhaust system deteriorated and slight blow (6.1.2 (a))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning brake light 2 bulbs not working (4.3.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge worn low (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material across rear axle area (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre badly cracking or perishing

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre badly cracking or perishing

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords also badly cracking (5.2.3 (d) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Tyre badly cracking or perishing

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre badly cracking or perishing

Horn not working (7.7 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Emissions not tested vehhilcle over reving (8.2.1.2 (d))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

rear exhaust box badly corroded

Upper Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Horn not working (1.6.2a)

Front registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Rear Brake pad(s) wearing thin (3.5.1g)