2007 Audi A4

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Nail in tyre ()

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Outer Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Front Shock absorbers light misting of oil or has limited damping effect both o/s & n/s (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear spring mount area (5.3.6 (a) (i))

Nearside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii))

Vehicle structure is fractured and structural rigidity is significantly reduced as marked (6.1.1 (a) (i))

Front Shock absorbers light misting of oil or has limited damping effect both o/s & n/s (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear spring mount area (5.3.6 (a) (i))

Nearside Front tyre getting low,3mm

Nearside Rear side lights dim

Registration plate lamp not working bulb holder connectors broken (1.1.C.1d)

Nearside Front tyre getting low,3mm

Nearside Rear side lights dim

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm also has nail in tread (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect dipped (1.8.A.1b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust flexi part slightly detorioted

front brake discs slighty lipped

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)