MOT Status
ExpiredMileage
47,790 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Quarter panel (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive flitch panel (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive flitch panel (5.3.6 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive flitch panel (5.3.6 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive flitch panel (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive floor sections (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing section (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing section (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner swill and inside wheel arch (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Suspension component mounting prescribed area is corroded but not considered excessive floor sections (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing section (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing section (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Advise engine covers fitted
Advise o/s/r tyre showing signs of age advise replacement
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Inner Sill (5.2.6)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Inner Sill (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear cracks in outer tyre wall
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear cracks in outer tyre wall
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BD57 XKT is a 2007 Ford Ka in Silver with a 1,297cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2007 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,273 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BD57 XKT, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 19 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BD57 XKT?
You can check the full history of BD57 XKT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BD57 XKT registered?
BD57 XKT is a 2007 Ford Ka, first registered on 31 October 2007.
Is BD57 XKT safe to buy?
The MOT history for BD57 XKT shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BD57 XKT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BD57 XKT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.