2012 Ford Mondeo

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms nearside and offside ( Front Bushes ) (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms nearside and offside ( Front Bushes ) (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Fuel system component leaking engine bay (6.1.3 (b) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front both front tyres scrubbing edges

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Front both front tyres scrubbing edges

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Brake pad(s) wearing thin close to limit (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Torque/reaction arm slightly worn front bushing (2.4.G.1)

Offside Rear Torque/reaction arm damaged but not seriously weakened front bushing (2.4.G.1)

covers fitted top and bottom

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components