1998 Peugeot 106

Brake hose has slight corrosion to ferrule all ferrulles corroded (1.1.12 (f) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Rear Exhaust noisy (8.1.1 (a))

Lower the underside of vehicle has been heavily wax oiled chassis rails inner sills , brake pipes , not allowing full inspection .

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

front suspension has been lowered causing anti roll bar to rub on chassis

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Headlamp aim too high (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Wheel bolt(s) missing (4.2.A.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

front suspension has been lowered causing anti roll bar to rub on chassis

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Shock absorber has a slightly reduced damping effect (2.7.5)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Headlamp switch faulty (1.7.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Shock absorber has a slightly reduced damping effect (2.7.5)

Spare tyre defective

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Brake load sensing valve linkage seized (3.6.E.3)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Registration plate lamp not working (1.1.5c)

adjust handbrake.

advise driveshaft to be cleaned and regreased.

n/s/f tyre bald on inside edge.