MOT Status
ExpiredMileage
210,315 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Brake hose twisted (3.6.B.4c)
Nearside Outer Front constant velocity joint is insecure (2.5.C.1b)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Front Inner brake disc worn, pitted or scored, but not seriously weakened wear and corrosion on inner (3.5.1i)
Rear Exhaust has a major leak of exhaust gases pipe (7.1.2)
Front Exhaust has a minor leak of exhaust gases box (7.1.2)
Front Inner brake disc worn, pitted or scored, but not seriously weakened wear and corrosion on inner (3.5.1i)
Front excessive noise from clutch area recomend not to drive faulure possible
Rear Tyre worn close to the legal limit 1.6 mm on both rear (4.1.E.1)
Brake pad(s) wearing thin (3.5.1g)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n/s/f strut top mount tight to turn
Nearside Rear Emissions not tested (7.4.B.1)
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Exhaust system not adequately supported (7.1.1)
Brake pad(s) wearing thin (3.5.1g)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n/s/f strut top mount tight to turn
Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Valve stem seriously misaligned (4.1.D.1e)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear rear brake binding (3.7.B.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Brake pad(s) wearing thin (3.5.1g)
both front brake discs corroded.
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
both front brake discs corroded.
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
n/s/r tyre cracked on inner sidewall
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
n/s/r tyre cracked on inner sidewall
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF02 MHU is a 2002 Peugeot 206 in Red with a 1,997cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BF02 MHU, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF02 MHU?
You can check the full history of BF02 MHU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF02 MHU registered?
BF02 MHU is a 2002 Peugeot 206, first registered on 13 March 2002.
Is BF02 MHU safe to buy?
The MOT history for BF02 MHU shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF02 MHU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF02 MHU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.