MOT Status
ExpiredMileage
122,582 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor 2 places (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Vehicle structure has slight corrosion (6.1.B.2)
both rear axle bushes deteriorated resulting in slight movement
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Passenger's seat insecure (6.2.A.1)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
outer sills corroding
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
outer sills corroding
FRONT BRAKES SLIGHTLY OUT OF BALANCE, ADVISE INSPECTION
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF03 FLZ is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BF03 FLZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF03 FLZ?
You can check the full history of BF03 FLZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF03 FLZ registered?
BF03 FLZ is a 2003 Ford Ka, first registered on 1 March 2003.
Is BF03 FLZ safe to buy?
The MOT history for BF03 FLZ shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF03 FLZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF03 FLZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.